Propane Tank Regulations
The gas container, liquefied petroleum system or LP system is a collective term by OSHA that refers to the piping, regulators, hoses, regulators, fittings and valves. Depending on the capacity of the tank, the agency needs specific parts. These individual parts should undergo recognized laboratory testing. The correct laboratory approval will prove that the system parts meet construction, pressure and thickness standards.
Tank Location
The organization OSHA determines how near the propane tank could be mounted in relation to ignitable materials, to buildings, to tanks which contain flammable liquids, welders and cutting torches. These strict rules are implemented to make the jobsite as safe as possible for the employees and those others who are in the vicinity.
Nameplate Marks
LP systems require that the address, the name, the container supplier, and or the tanks brand name, be marked on the propane container. The capacity of the container is to be listed with the following details: gallons or pounds of fuel, square foot outside surface, fill level, and pressure. Furthermore, details regarding whether or not the container is designed to be installed underground or above ground is also visible. These markings must be on a metal plate attached to the container somewhere visible. OSHA requires that each and every tank should be marked by the National Board of Boiler and Pressure Vessel Inspectors in order to be considered ready and safe to utilize.
Tank Modifications and Repairs
Any type of maintenance to LP systems that require welding are regulated by OSHA. Repair personnel and tank owners need to be familiar with standards and regulatory codes which the tanks were manufactured. Welding repairs to any system part which is subject to internal pressure has to first comply with these fabrication codes. Other welding is only permitted on saddle plates, lugs or brackets.
The OSHA works hard to make sure that individuals who work with lift trucks and nearby are kept safe. They have strict training procedures and regulations in place so as to make certain that these industrial machinery and their repair processes are handled with respect and as safe as possible. It is very vital that companies follow their rules and steep fines can occur if they are not adhered to.